The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V7 700 V7 Special 1969-1971 850 GT All Categories

Sort by Title

Sort by Price

Page 16 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Bevel Box Sump Gasket

TRA12601 Fits V7 700, 850 GT, V7 Special (1969-1971), V7 Sport

Dimensions:
L 110mm W 45mm

Gasket for drive box sump

part in stock More than 5 in stock

12351601 GU12351601 12 35 16 01
1235 1601 1235.1601 12.35.16.01

£1.40

INC VAT

£1.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 99cm

BRA00012 Universal Part

Dimensions:
99cm x 5mm x 8mm

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Plug Timing Inspection Hole

ENA93220 Universal Part

Dimensions:
26mm OD

Rubber grommet for clutch bell housing / flywheel timing hole

Timing hole plug or timing hole bung. Also used to fill holes used to mount Griso factory luggage rack

part in stock More than 5 in stock

93180220-z 93180220 GU93180220 93 18 02 20
9318 0220 9318.0220 93.18.02.20

£1.60

INC VAT

£1.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Swingarm Bearing

FRA92217 Fits 850 GT, V7 700, V7 Special, 750S, S3, V7 Sport, 850/1000 ALL Models, Quota 1100, Cali 1100 (1994-1997), Daytona (1991-1995), Cali EV ALL, Cali Stone, Cali Jackal, Cali Vintage, Cali Aquila Nera

Dimensions:
40mm OD

Swing arm taper roller bearing

2 races required per bike, supercedes unsealed bearing Guzzi ref. 92249217 and 92249216. See TRA90434 for oil seals

part in stock More than 5 in stock

92249213 GU92249213 92 24 92 13
9224 9213 9224.9213 92.24.92.13

£18.80

INC VAT

£15.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Choke Plunger Return Spring

FUA13601 Fits Nuovo Falcone, V7 Special (1969-1971), V7 700 (VHB carb), 850 GT, G5, Cali 2, 1000 SP, T3, T4, SP II, T5, Mille GT, 850T, V7 Sport, 750S, S3, Cali 3, Cali 1100 (carb), Le Mans 1, Le Mans 2, Le Mans 3, Strada 1000

Dellorto choke plunger return spring for models with Dellorto VHB 30, PHF 30 and PHF 36 carbs

part in stock More than 5 in stock

13937600 GU13937600 13 93 76 00
1393 7600 1393.7600 13.93.76.00

£1.70

INC VAT

£1.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Carburettor Fuel Filter

FUA60888 Fits V7 700, V7 Special, 850 GT, 1100 Sport Carb, Cali 3, Cali 1100 Carb, 850/1000 ALL Models, Nevada 350, Nevada (1991-2003), V35 ALL, V50 ALL, V65 ALL, V7 Sport, 750S, S3

Dimensions:
7.5mm internal diameter

Fuel filter for Dellorto carb petrol pipe union.

Also known as Guzzi ref. 002127628 and Ducati ref. 002127628

part in stock More than 5 in stock

43934000 GU43934000 43 93 40 00
4393 4000 4393.4000 43.93.40.00

Also fits Benelli Sei 750, Benelli Sei 900, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 600 SL Pantah, Ducati 750 GT/Sport Koewe, Ducati 750/900 SS Koewe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, S2, Ducati 900 MHR-I, Ducati 1000 MHR-2,S2

£1.90

INC VAT

£1.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Bearing Steering Head

SUA92249 Fits V7 700, V7 Special (1969-1971), V7 Sport, S3, 750S, 850T, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV (1997-2006), Cali Stone, Cali Jackal, Cali Vintage, Nevada 350, Nevada 750, Quota ALL, V11 Sport, Centauro, Lario, V65 Florida, NTX 350, V35C (series 2), V50C (series 2), V65 GT, V65 TT, V65 Lario, V65 Florida, V75, 750T, Strada 750, 750 Targa, V7 Classic, V7 Cafe, V7 Racer, Breva 750, Bellagio, V7 II ALL

Taper needle roller bearing used as steering head bearing

2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake

part in stock More than 5 in stock

92249225 GU92249225 92 24 92 25
9224 9225 9224.9225 92.24.92.25

£20.50

INC VAT

£17.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Joint Gaiter Clip Stainless Steel Small

TRA12544 Fits V7 Sport, 750S, S3, Cali EV, Cali Jackal, Cali Special, Cali Stone, Centauro, Griso, MGS-01, Quota 1100, 850 GT, Daytona, Le Mans 1, Le Mans 2, Le Mans 3, Mille GT, T3, T4, T5, T5 Polizia, V11 Sport

Dimensions:
38mm - 63mm ID x 8mm

Stainless steel front UJ gaiter / boot clip

Also known as Guzzi ref. 12548401. This clip is also suitable for some S & B air filters and inlet manifolds - check outside diameter of carb or throttle body

part in stock More than 5 in stock

93305060 GU93305060 93 30 50 60
9330 5060 9330.5060 93.30.50.60

£3.20

INC VAT

£2.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Float Bowl Gasket Dellorto

FUA90001 Fits V35 ALL, V50 ALL, V65 ALL. V75 ALL, Nevada 350, Nevada 750 (1991-2003), V7 Special, 850 GT, V7 Sport, 750S, S3, 850/1000 ALL Models, Cali 1100 (Carb), 1100 Sport Carb

Dellorto float bowl seal for VHB, PHF, PHM and PHBH carbs

part in stock More than 5 in stock

£1.90

INC VAT

£1.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 16 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33